Browse all practice questions for the Aerospace Engineering Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Aerospace Engineering Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • DME stands for
  • What does ESA stand for in aerospace contexts?
  • Which surface of an aircraft controls the yawing motion of the nose?
  • What term refers to the tail assembly of an aircraft, including horizontal and vertical stabilizers, elevators and rudder?
  • What is the trailing edge of an airfoil?
  • Which pairing is correct?
  • In a four-stroke engine, which stroke involves gas expansion and does work on the piston?
  • What term describes the condition where a structure can no longer fulfill its purpose due to collapse, break or bending?
  • The space in the fuselage of a small airplane containing seats for the pilot, co-pilot, and sometimes passengers is the
  • Latitude’s relation to position on the globe is best described as?
  • Which of the following are standard components of the Instrument Landing System?
  • In an internal combustion engine, which stroke expels the combustion gases from the chamber?
  • Photopic Vision describes?
  • Indicated Airspeed refers to which of the following?
  • Which term describes a device used to measure wind velocity?
  • Which term describes aircraft speeds between Mach 10 and 25?
  • In a rocket propellant, the oxidizer's role is to
  • What is Flight Management System (FMS)?
  • Fatigue failure is most often caused by which loading condition?
  • Avionics encompass electronics used onboard for what purposes?
  • Where is the Blind Spot located?
  • LAAS stands for Local Area Augmentation System. What is its primary purpose?
  • The distance from wing tip to wing tip of a wing planform is called what?
  • A potentiometer is best described as
  • Which U.S. government agency is responsible for safety of civil aviation?
  • Any of the conical photosensitive receptor cells of the vertebrate retina that functions in color vision is called?
  • Planet is defined as?
  • The argument of perigee describes which aspect of an orbit?
  • Weight is defined as?
  • Which term denotes electronics used onboard for piloting an aircraft?
  • Which term refers to the geometric center of a two-dimensional area?
  • RNAV provides enhanced navigational capability to pilots by employing which concept?
  • Which structure contains the muscles that regulate the size of the pupil?
  • Which term denotes the surface-point about which an object's surface area is centered?
  • The horizontal stabilizer is a structure oriented horizontally at the tail; what does it primarily achieve?
  • Which term corresponds to 'The information produced by a computer'?
  • Which aerospace engineer specialization area would be involved in designing guidance systems?
  • Which database is produced by the FAA to record accidents and incidents?
  • What does a gas turbine primarily do to produce thrust?
  • TACAN provides bearing and distance to the TACAN station using which navigation concept?
  • NTSB stands for which organization?
  • Which wing geometry feature describes the decrease in wing chord from root to tip?
  • Which term describes the airspeed of an aircraft relative to undisturbed air?
  • Hypoxia occurs when which condition exists in the body?
  • Kessler Syndrome describes which scenario in orbital space?
  • Aircraft speeds between Mach 1 and 5 are called what?
  • The Keel Effect refers to which phenomenon in aircraft stability?
  • What does RAAN stand for in orbital mechanics?
  • What is a light-year?
  • What are flaps on an aircraft?
  • A material made of multiple layers of fibers held together with a matrix is called?
  • Which of the following is not listed as a specialization area for an aerospace engineer?
  • What does GA stand for in aviation and what does it include?
  • Which statement correctly describes Low Earth Orbit?
  • What is the fuselage?
  • Cross-Sectional Area is defined as
  • Polar Orbit has what inclination?
  • Which term refers to something made up of interdependent parts in a definite pattern of organization, such as trusses, frames, or machines?
  • Drag is a force that
  • Which mechanical property indicates the ability of a material to handle overloading before fracture?
  • VORTAC provides VOR azimuth, TACAN azimuth, and TACAN DME at one site. What is this navigation aid called?
  • A turbofan engine is a turbojet engine that has which feature?
  • Aspect Ratio in aerodynamics refers to what?
  • The frequency range L/MF includes the upper limit of the range. Which statement is true?
  • Which term describes a force with its line of action passing through the cross-section centroid and perpendicular to the plane of the section?
  • Latitude is a geographic coordinate used to specify positions on a sphere. How is latitude measured?
  • Ductility
  • During the power stroke in an internal combustion engine, what event initiates gas expansion?
  • Fatigue in materials refers to loss of load-bearing ability under which kind of loading?
  • In aviation, which context is AGL commonly used to describe altitude?
  • In data processing, what term refers to data entered into a system?
  • The rolling motion about the longitudinal axis caused by ailerons deflecting in opposite directions is best described as what term?
  • What term is defined as the reciprocal of the bulk modulus?
  • Which term describes the primary lifting surface of an aircraft that generates lift as air moves past it?
  • Which mechanical property describes a material's ability to absorb mechanical energy without sustaining permanent damage?
  • What best defines Maneuverability in aircraft?
  • In aviation, the powerplant refers to the combination of which components?
  • Lapse Rate describes which atmospheric property?
  • Hypersonic speeds are classified as which Mach range?
  • Which retinal photoreceptor is most sensitive to faint light?
  • Digital representation of a physical quantity is
  • Depth perception is the ability to
  • What is LORAN?
  • Identify the two-dimensional shape formed when a plane intersects a cone.
  • Axial Stress is defined as which of the following?
  • The capability of an aircraft to respond to your flight inputs, especially with regard to attitude and flight path, is known as?
  • What does ADF stand for?
  • Which term corresponds to 'The point in an orbit that is closest to earth'?
  • Non-Directional Beacon (NDB) provides bearing information by transmitting signals to help determine bearing to or from the station.
  • Which term corresponds to 'Use of color-sensitive cones for direct vision in good light'?
  • Which organization was known as the National Advisory Committee for Aeronautics prior to 1958?
  • Anemometer measures what?
  • True North is defined as geographic north. Which term matches that definition?
  • Rocket propellant is a mixture of which components?
  • What is Magnetic Variation?
  • In orbital mechanics, the angle between the perigee point and the satellite's location measured in the direction of the satellite's motion is known as which term?
  • Modulus of Elasticity is defined as...
  • Which device senses and indicates direction to an NDB ground transmitter?
  • An aircraft with wings mounted so that the wingtips are higher than the wingroots is described as having which feature?
  • Which term defines the aircraft’s tendency to return to a state of equilibrium after a disturbance?
  • What does UN stand for?
  • True Course is defined as a course corrected for variation and deviation that is referenced to geographic north. Which term describes this concept?
  • The piston moves back towards the cylinder head is referred to as the?
  • VHF refers to which frequency range?
  • A reduction in the chord of a wing as measured from the root to the tip of the wing is called what?
  • UAV stands for which of the following?
  • To obtain the cross-sectional area, a plane cut is made at which orientation relative to the object's axis?
  • Which term describes a large system of stars, gas, and dust bound together by gravity?
  • NACA is best described as...
  • Boundary Layer describes what phenomenon?
  • Knots are a unit of speed used for aircraft and boats. Which statement correctly describes the knot?
  • Which characteristic defines a turbofan compared to a pure turbojet?
  • What is Lift?
  • The vertical stabilizer's orientation and forces produced are which combination?
  • Which engine type is a gas turbine engine designed for jet propulsion with no large front fan?
  • Which aircraft component serves as the primary body to which major structures attach and houses the cabin and cockpit?
  • During the intake stroke of a piston engine, the piston moves away from the piston head. Which of the following statements is correct?
  • An airfoil provides aerodynamic force when interacting with what?
  • Small bodies composed of ice and rock in various orbits about the sun are called?
  • INS stands for which navigation system?
  • What is a flange in structural shapes?
  • Molniya Orbit is characterized as...
  • Which of the following is NOT typically a focus area for an aerospace engineer?
  • Which tail control surface primarily governs the pitching motion of an aircraft?
  • Pilotage is?
  • Which property describes a material’s ability to resist deflection or stretching?
  • Which phenomenon involves the loss of lift due to airflow separation on the wing’s upper surface?
  • Which system uses a localizer and glideslope for precision approach guidance?
  • Ailerons are used to generate which type of aircraft motion?
  • What is Machinability?
  • Which orbital element is abbreviated as ω?
  • Leading Edge is the part of the airfoil that meets the airflow first. Which option correctly identifies this feature?
  • Which of the following is NOT a conic section?
  • Which map type would be most useful for flight planning across varied terrain due to elevation data?
  • What term describes the outline shape of a wing when viewed from above?
  • Angle of Attack is the angle formed by which two aspects?
  • True Anomaly is the angle between the perigee point and the satellite's location measured in the direction of the satellite's motion. Which term is this angle called?
  • A digital circuit that outputs a code based on which input is activated is called a(n)?
  • LORAN determines position by measuring what?
  • The common reference point for the three axes of the aircraft is called what?
  • TACAN stands for which navigation aid?
  • The latitude coordinate can be described as a position reference relative to which geographic feature?
  • Geographic north is also known as which term?
  • Which tissue contains rods and cones and serves as the site for converting light into neural signals?
  • RAAN is the angle measured along the equatorial plane between a fixed reference direction and which orbital feature?
  • The condition of a string, wire, or rod that is stretched between two points is called what?
  • In flight navigation, what is a predetermined geographical position called?
  • In computing, what does Output refer to?
  • Payload in rocketry refers to?
  • Ductility is defined as
  • MSL stands for...
  • LAAS is used to augment GPS for which aviation phases?
  • Which input method is used to feed routes into the Flight Management System?
  • What is the Longitudinal Axis of an aircraft?
  • The empennage comprises which components?
  • NGO stands for which phrase?
  • Which statement best describes the maximum altitude gain per unit time parameter Vy?
  • Which device is a motor modified to provide feedback on speed, direction, and revolutions?
  • VOR azimuth is oriented from which reference direction?
  • Aircraft speeds under Mach 1 are called what?
  • Which tail surface primarily provides yaw control?
  • Which term corresponds to 'The cargo carried by a rocket'?
  • What is a galaxy?
  • Which item is NOT a standard component of the Instrument Landing System?
  • Perigee is defined as?
  • Which term refers to a device that provides feedback on motion parameters such as speed and direction?
  • What term describes the color vision receptor cells in the retina?
  • Which instrument is used to measure the angular altitude of a star above the horizon?
  • Which navigation system is described as a self-contained RNAV system?
  • What does Vy represent?
  • Which term would you use to refer to the distance across the wing from tip to tip?
  • What term describes the condition where there are no net external forces acting on a body and it remains at rest or moves at a constant velocity?
  • Moment of Inertia describes...
  • NACA's historical role included providing advice and carrying out cutting-edge aeronautics research in the United States.
  • Dihedral wing configuration refers to
  • Which ILS component provides vertical guidance during an approach?
  • UHF stands for Ultrahigh Frequency, the band between which frequencies?
  • Inclination is defined as the angle between the earth's equatorial plane and which plane?
  • Which aerodynamic condition is caused by airflow separation from the wing’s upper surface, leading to a rapid decrease in lift?
  • What is Magnetic Deviation?
  • A VOR stands for Very High Frequency Omnidirectional Range Station. It transmits navigation signals in how many azimuth directions?
  • Which statement about drag is correct?
  • Which statement best defines an aircraft?
  • What is Magnetic Course?
  • Bearing, in navigational terms, is what?
  • Turbojet is a type of gas turbine engine.
  • Which term is used to describe the system that prevents collisions and organizes air traffic?
  • The vertical axis is perpendicular to which axes?
  • The movement about the vertical axis controlled by the rudder is known as what?
  • Lateral Axis in an aircraft is defined as which?
  • ATC in aviation stands for what?
  • Geostationary Earth Orbits are abbreviated as GEO. What is the key characteristic of these orbits?
  • The geometric center of an area is known as?
  • Which term describes the horizontal direction to or from a point, measured clockwise from a reference direction?
  • Deformation refers to
  • The outline shape of a wing when viewed from above is known as what?
  • What term describes the wind energy device that produces electricity, typically with one to three blades?
  • The vertical stabilizer primarily does what?
  • What is a generator?
  • Which statement defines Mach in the context of aviation speed?
  • Mean Sea Level is used as the reference for altitude in navigation.
  • What term describes the change in the length of an object per unit length?
  • Which structure in the eye is the opening that regulates the amount of light entering?
  • The Global Positioning System can provide data to how many users?
  • LORAN stands for which term?
  • Which acronym refers to an orbit relatively close to the Earth?
  • When a material is reduced in volume by the application of pressure; the reciprocal of the bulk modulus is called?
  • Which component is not typically part of the aircraft empennage?
  • Analog signals represent physical quantities by what method?
  • What does Vx represent?
  • Pitch refers to motion about which axis?
  • Asteroids are best described as which of the following?
  • IFR governs procedures for which type of flight operations?
  • What is a primary functional effect of flaps on an aircraft?
  • Which navigation aid provides VOR azimuth, TACAN azimuth, and TACAN DME at a single site?
  • Which orbital parameter is abbreviated as 'a' and characterizes the size of an ellipse?
  • What is Apogee in orbital terminology?
  • L/MF stands for Low or Medium Frequency. What is its stated frequency range?
  • The point on the surface of an object about which the object's surface area is centered is called?
  • IFR is the acronym for which of the following?
  • What is longitude?
  • LAAS focuses its service on the airport area within what approximate radius?
  • VFR stands for?
  • NASA is the U.S. government agency responsible for science and technology related to air and space.
  • Wash In/Wash Out refers to what?
  • Forward-acting force which opposes drag and propels the aircraft through the air is called what?
  • Which instrument is used to measure the angular altitude of celestial bodies above the horizon?
  • The movement about the vertical axis produced by the rudder and controlled by pedals is called what?
  • NDB operates on which frequency bands?
  • Eccentricity describes the roundness of what?
  • DME distance information is provided in which units using which distance type?
  • What is the force acting across a unit area in a solid material resisting the separation, compaction, or sliding that tends to be induced by external forces?
  • Which term describes a material formed from layers of fibers bound by a matrix?
  • The Universe is defined as which of the following?
  • Abbreviated as a, which term describes the size of an ellipse?
  • A map showing the three-dimensional nature of the terrain surface (elevations and landforms) as well as other ground features is called what?
  • A potentiometer can vary resistance within a circuit to affect which outputs?
  • Which term refers to the extremely accurate navigation aid used in civil aviation?
  • A glider is an aircraft designed to fly without what?
  • Dead Reckoning in aviation is navigation based on
  • A small body which orbits a larger body is known as which term?
  • Molniya Orbit is abbreviated as Moly.
  • A term used for a wind energy conversion device that produces electricity; typically having one, two, or three blades is called what?
  • Which property describes a material’s resistance to deformation?
  • What characterizes Low Earth Orbit?
  • What is True Airspeed?
  • What does Global Positioning System (GPS) provide?
  • What does Mach describe?
  • AGL stands for Above Ground Level. How is altitude expressed under AGL?
  • The wing is the component that does what in flight?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy